Cooper Bussmann VERSION 1.6 BU-945U-E 802.11 DSSS User Manual
Page 63
www.cooperbussmann.com/BussmannWirelessResources
Cooper Bussmann Wireless Ethernet & Device Server BU-945U-E 802.11 DSSS User Manual
63
3A1582Rev1.6
This – t command is used to repeatedly ping the specified node in the network, to cancel use “Ctrl – C”
A good test for the network once it is first set up is to use “ping” repeatedly from one PC’s IP address to the other PC’s IP address. This gives a
good indication of the network’s reliability and how responsive it is from point to point. When you enter “Ctrl-C” the program reports a packet
sent-received-lost percentage.