Cooper Bussmann VERSION 1.6 BU-945U-E 802.11 DSSS - Manual (Page 27)

www.cooperbussmann.com/BussmannWirelessResources
Cooper Bussmann Wireless Ethernet & Device Server BU-945U-E 802.11 DSSS User Manual
27 3A1582Rev1.6
For optimal security a passphrase consisting of a combination of
letters and numbers (i.e., not just a simple word or phrase) as well as
upper and lower case. E.g., “WiReLeSs TeChNoLoGy 2010”
WPA Enterprise - Supplicant Configuration
Username / Password: User credentials that match a valid user on
the RADIUS server.
Enable Debug: Must only be used during commissioning and only if
requested by Cooper Bussmann Support. This must be disabled for
normal operation.
Trusted CA Certificate Upload: Upload the certificate of the issuer of
the RADIUS server’s certificate. This enables the Supplicant to verify
the identity of the RADIUS server during the authentication process.
Certificate Verification result: Once a certificate has been loaded,
this text box will contain validation information for the certificate. If
this text is blank or contains errors, the certificate is invalid.
Trusted CA Certificate Contents: Displays the contents of the loaded
certificate.
WPA Enterprise - Authenticator Configuration
RADIUS Server IP Address/Port/shared secret: Connection
information for the RADIUS Authentication Server.
Supplicant Re-authenticate Period: Sets the maximum time at
which the Supplicant must re-authenticate. This parameter determines
maximum time a client will still have access to the network after its
user credentials have been revoked.
Enable Debug: Must only be used during commissioning and only if
requested by Cooper Bussmann Support. This must be disabled for
normal operation.