Canon CARD CP-10 - Manual (Page 6)

6
Printing Flow Diagram
Follow the steps outlined below to prepare the printer and install the
necessary software to enable printing.
Prepare the printer.
Insert paper cassette and ink cassette.
See CP-100 or CP-10 user guide.
Install the necessary software.
Install the printer driver and ImageBrowser into your
Macintosh.
Turn the printer’s power on.
Turn the printer’s power on and connect the printer to the
Macintosh.
See
Turning On the Printer ( ➡ p.16),
Connecting the Printer to Macintosh ( ➡ p.17) in this user guide.
Select an image to print.
Start ImageBrowser and select an image to print.
See
Starting ImageBrowser (Mac OS 8.6 - 9.2 ➡ p.20, Mac OS X ➡ p.36),
Selecting an Image for Printing (Mac OS 8.6 - 9.2 ➡ p.21, Mac OS X ➡ p.36)
in this user guide.
Continued next page.
See
Installing the Software from the Solution Disk ( ➡ p.8),
Installing the Printer Driver ( ➡ p.10) in this user guide.
To uninstall the printer driver,
see Uninstalling ( ➡ p.13) in this user guide.