Clarion NX509 - Manual (Page 56)

54
NX509
English
Owner
’s ma
nua
l
USB Devices
If an error occurs, one of the following displays is displayed.
Take the measures described below to solve the problem.
DVD Player
Problem Cause Measure
USB device cannot
be inserted. The USB device has been
inserted with wrong
direction. Reversing the connection direction of the USB
device, try it again.
The USB connector is
broken. Replace with a new USB device.
USB device is not
recognized. The USB device is
damaged. Disconnect the USB device and reconnect. If the
device is still not recognized, try replacing with a
different USB device.
Connectors are loose.
No sound heard with
the display “No File”
shown. No MP3/WMA/AAC file is
stored in the USB device. Store these files properly in the USB device.
Sound skips or is
noisy. MP3/WMA/AAC files are
not encoded properly. Use MP3/WMA/AAC files encoded properly.
The iPod’s video
image is disturbed. The TV Signal setting of
the iPod is not set correctly. Set the TV Signal setting (NTSC/PAL) of the iPod
correctly.
9. ERROR DISPLAYS
Display Cause Measure
Error 2 A disc is caught inside the
DVD player and is not
ejected. This is a failure of DVD player’s mechanism.
Consult your store of purchase.
Error 3 A disc cannot be played
due to scratches, etc. Replace with a non-scratched, non-warped disc.
Error 6 A disc is loaded upside-
down inside the DVD
player and does not play. Eject the disc then reload it properly.
No MP3/WMA/AAC/DivX
file is recorded on the disc. Write these files properly onto a disc.
Parental Violation Parental level error Set the correct Parental level.
Wrong Region Region code error Eject the disc, and replace correct region code
disc.
DRM WMA files protected by
DRM are played. Perform the operation such as skipping a file.
(Repeat and random playback mode may be
canceled.)
Not Support Files not supported by this
unit are played.