I low battery indication, Turn your headset or bluetooth audio adaptor off – Philips Casque stéréo Bluetooth User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
I Low battery indication
The LED will flash red instead of green when the battery is low. Finish your cali
'
before re-charging as connecting the charger to the headset will put your headset
in charging mode and could cut an ongoing the cali.
Turn your headset or optional Bluetooth audio adaptor on
Press and hold the multi-function button until the LED turns green.
The green LED will flash every 3 seconds indicating the device is powered up.
Before you use the headset for the first time with a Bluetooth
enabled device you have to establish a relationship between these two
devices by pairing them.
(See the section on pairing for details).
Turn your headset or Bluetooth audio adaptor off
While the headset or Bluetooth audio adapter is powered up, press and hold the
multi-function button until the LED turns red and then off.This indicates the device
is powered down.
The optional Bluetooth audio adapter will also turn off automatically after the
paired headset has been turned off or if you move the headset out of the 33 feet /
10 meter operating range.