) put your headset into pairing mode, Philips shb6100, Y.iil i – Philips Casque stéréo Bluetooth User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
T.iil ■
Setting
10:35
Connectivity
Bluetooth
Search for new devices
Paired devices
Select
Back
y.iil I
Setting
10:36
Devices Found
[Philips SHB6100
Seiect
Back
\ \ m 0
10:37
Setting Connectivity
Enter Passwords
****
0 0 0 0
Select
Back
1. ) Put your headset into pairing mode.
Make sure the headset Is off. Press the multi-function button until your
headsets LED will flash red and green alternately indicating that it has entered
pairing mode.The headset will remain in pairing mode for three minutes.
2. ) Search and discover your headset from the phone that you
want to pair the headset with.
•
After completing pairing step 1 access a menu on your mobile phone typically
called “Setup”,“Settings”,“Bluetooth” or “Connectivity”. Select the option to
discover or search for Bluetooth devices.After several seconds search time
your phone should indicate that it has found the “Philips SHB6I00”. For further
instructions on using Bluetooth on your mobile phone please refer to your
mobile phones user manual.
•
Upon selecting the headset on your mobile phone typically you will need to
confirm the pairing and enter a passkey or PIN. Please enter the headsets
PIN
“0000” (4 zeros).
If your phone asks whether you want to change the
headsets name, you may confirm the “Philips SHB6I00” name or change it.
•
The headset LED will flash green, indicating successful pairing. You are now
ready to talk and listen to music from your phone.
After the initial pairing you do not need to repeat this process.The headset will
connect automatically to the paired Bluetooth enabled device after turning it on.
Only if you pair the headset with another device you will have to repeat the pairing.