Casio EX-S3 - Manual (Page 97)

OTHER SETTINGS
97
OTHER SETTINGS
Specifying an Image for the Startup Screen
You can specify an image you recorded with the camera as
the startup screen image, which causes it to appear on the
monitor screen for about two seconds whenever you turn
on the camera in the REC mode.
1. In the REC mode or the PLAY mode, press
[MENU].
2. Select the “Set Up” tab, select “Startup”, and
then press [
̈
].
3. Use [
̇
] and [
̈
] to display the image you want
to use as the startup image.
4. Use [
̆
] and [
̄
] to change the setting, and
then press [SET].
Select this setting:
On
Off
To do this:
Use the currently displayed image
as the startup screen image
Disable the startup screen
Turning the Key Tone On and Off
Use the following procedure to turn the tone that sounds
when you press a key on and off.
1. In the REC mode or the PLAY mode, press
[MENU].
2. Select the “Set Up” tab, select “Beep”, and
then press [
̈
].
3. Use [
̆
] and [
̄
] to change the setting, and
then press [SET].
Select this setting:
On
Off
To do this:
Turn on the key tone
Turn off the key tone