Troubleshooting, Please read the following carefully – Chicago Electric 99702 User Manual
Page 16
SKU 99702
For technical questions, please call 1-800-444-3353.
Page 16
troubleshooting
problem
possible causes
likely solutions
Sprayer will not
start
No power at outlet.
1.
Cord not connected.
2.
Sprayer turned off under
3.
pressure.
Check power at outlet.
1.
Check that cord is plugged in.
2.
Turn pressure control knob to maximum, or
3.
PRIME/SPRAY knob to PRIME.
Sprayer will not
draw paint
Sprayer has lost prime.
1.
Paint level too low in container.
2.
Suction set clogged.
3.
Suction tube loose at inlet.
4.
Prime sprayer again.
1.
Fill paint container.
2.
Clean suction Set.
3.
Tighten Suction tube connections.
4.
Pressure drops
when trigger pulled
Spray tip worn.
1.
Suction set screen clogged.
2.
Gun filter plugged.
3.
Paint too heavy of coarse.
4.
Replace spray tip.
1.
Clean suction set screen.
2.
Clean gun filter.
3.
Strain and/or thin paint.
4.
Paint runs
excessively
Paint too diluted.
1.
Spray adjustment wrong.
2.
Gun movement too slow.
3.
Too close to surface.
4.
Add undiluted paint to thicken.
1.
Decrease pressure.
2.
Increase speed of stroke.
3.
Move gun back from surface.
4.
Paint coverage
poor
Paint not diluted enough.
1.
Paint is grainy.
2.
Dilute paint more.
1.
Filter paint.
2.
Follow all safety precautions whenever diagnosing or servicing the
tool. disconnect power supply before service.
pleAse reAd the FOllOWing cAreFully
THE MANUfACTURER AND/OR DISTRIbUTOR HAS PROvIDED THE PARTS LIST AND ASSEMbLy
DIAGRAM IN THIS MANUAL AS A REfERENCE TOOL ONLy. NEITHER THE MANUfACTURER OR
DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT
HE OR SHE IS qUALIfIED TO MAkE ANy REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS
qUALIfIED TO REPLACE ANy PARTS Of THE PRODUCT. IN fACT, THE MANUfACTURER AND/
OR DISTRIbUTOR ExPRESSLy STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD
bE UNDERTAkEN by CERTIfIED AND LICENSED TECHNICIANS, AND NOT by THE bUyER. THE
bUyER ASSUMES ALL RISk AND LIAbILITy ARISING OUT Of HIS OR HER REPAIRS TO THE
ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT Of HIS OR HER
INSTALLATION Of REPLACEMENT PARTS THERETO.