Chicago Electric 99702 - Manual (Page 10)

SKU 99702 For technical questions, please call 1-800-444-3353. Page 10
Remove plastic cap and thread the 4.
pressure hose onto the hose spray
port and secure.
hose connected
to spray port
power switch
5. Remove the plastic cap on the end
of the spray gun and thread the other
end of the hose onto it. Remove the
plastic cap from gun tip.
gun
connected
to hose
6. Thread the suction tube onto the inlet
valve.
Press the return tube onto the return
7.
tube fitting.
suction tube
connection
to inlet valve.
return tube
on return tube
fitting
OperAting instructiOns
read the entire impOrtAnt
sAFety inFOrmAtiOn
section at the beginning of this
manual including all text under
subheadings therein before set
up or use of this product.
tool set up
tO preVent
seriOus injury
FrOm AccidentAl
OperAtiOn:
turn the power switch of the
tool to its “OFF” position and
unplug the tool from its
electrical outlet before
performing any inspection,
maintenance, or cleaning
procedures.