Jaypro Sports CSGP-1 - Manual (Page 5)

Rev – 11/14 Page 5 of 11
IMPORTANT NOTICE:
1) BEFORE EACH USE CHECK EQUIPMENT FOR PROPER CONNECTING
HARDWARE AND STRUCTURAL INTEGRITY. REPLACE DAMAGED OR
MISSING HARDWARE IMMEDIATELY.
2) USE OF THIS EQUIPMENT OTHER THAN INTENDED, MAY BE
HAZARDOUS.
3) ALTERATION OR MODIFICATION OF THIS EQUIPMENT MAY BE
HAZARDOUS AND RESULT IN INJURY. FOR REPAIR OR
REPLACEMENT, CONTACT YOUR DEALER OR JAYPRO SPORTS.
ASSEMBLY INSTRUCTIONS
TOOLS REQUIRED:
(1) 9/16” Socket Wrench and Box Wrench
(1) 3/4” Socket Wrench and Box Wrench
(1) 15/16” Socket Wrench and Box Wrench
(1) Scaffolding, Lull or Boom Lift
(1) Electric Drill
(1) Drill Bits:
a. 1/2"
b. 3/16” & 3/8” drill bits to pilot holes (recommended)
(1) 17/32” Transfer Punch (recommended)
(1) 3’ Level Device
Important Note:
Installation of the ceiling suspended goal post system requires the lifting and
handling of substantial weight, up to 340 lbs. Safe installation requires at least four men
and the use of appropriate material handling equipment such as scaffolding, a Lull or
boom lift.
The ceiling suspended goal post offers the ability to adjust the height of the
crossbar and plumb it independently. Care should be taken at each step to ensure the
framework is square and plumb.