Jaypro Sports FBGP-700C - Manual (Page 5)

T:\Aftermarket\Football\Drawings\FBGP-700\DOCUMENTATION\FBGP-700Installs.doc
REVISION D 7/10 4
Tightening ½” bolts between crossbar and gooseneck:
Top Upright Installation:
Place the end fitting in the end of the crossbar and plumb to level in two directions – front
to back and side to side. Mark the holes using a center punch. IMPORTANT: It is
important that the holes in the end fitting be properly placed to ensure that the end fittings
are square and the uprights are parallel to each other.