Jaypro Sports BLCH-521GR - Manual (Page 7)

© 2009 Jaypro Sports Equipment JSL-Inst037 Rev A 08/05/2010 7 of 9
e) Install Guardrail Panels:
1. Install the back center panels (23) between the rear support posts as shown in Detail 5B.
2. Install both the back end panels (24) as shown. Attach one corner post (22) to the end of
each end panel, using the hardware shown in Detail 5C.
3. Make adjustments to the support posts and enclosure panels as needed to achieve proper
alignment.
4. Tighten all hardware attaching the enclosure panels. Next, securely tighten all hardware
attaching the support posts.
5. Using a rubber mallet install tube caps (15) in the support post.
5A
DETAIL 5A
5B
5C
5C
DETAIL 5B
DETAIL 5C
3/8”-16 x 2-1/4” BUTTON HD CAP SCREW, SS (16)
3/8” SAE FLAT WASHER, SS (18)
3/8”-16 SLAB BASE TEE NUT, SS (19)
GUARDRAIL BACK PANEL (23)
GUARDRAIL BACK
PANEL END (24)
CORNER POST (22)
TYP GUARDRAIL END PLATE
CORNER POST (22) AND
SIDE SUPPORT POST (21)
REAR SUPPORT POST (20)
TYP GUARDRAIL
BACK TO BACK
GUARDRAIL REAR
SIDE PANEL (25)
3/8”-16 x 2-3/4” BUTTON HD CAP SCREW, SS (17)
3/8” SAE FLAT WASHER, SS (18)
3/8”-16 SLAB BASE TEE NUT, SS (19)
SIDE SUPPORT POST (21)