Jaypro Sports BLCH-521GR - Manual (Page 5)

© 2009 Jaypro Sports Equipment JSL-Inst037 Rev A 08/05/2010 5 of 9
b) Install Seating, Foot and Riser Planks:
1) Install safety end caps on each end of all planks as shown above. Lightly tap end cap onto
plank using a rubber mallet.
2) Working backwards from the first row, install all seating planks and foot planks as shown
in Detail 4A. Ensure that all planks are center on the understructure frame, making sure the
overhang on each end is an equal distance.
3) Install a riser plank on rows 5.
4) Do not anchor the 5th row seat plank at this point.
SEAT PLANK END CAP (6)
#8 x 1/2” PHILLIPS
PAN HD SCREW,
SELF DRILL (14)
STADIUM SEAT
PLANK, 1 ½” x 9 ½”
x 15 ft / 21 ft (4)
NOTE:
Rows 1 thru 4 have a
single foot plank. The foot
plank on rows 1 thru 4
should be centered. Row 5
has the double foot planks
plus a riser plank.
TYP RISER ATTACHMENT:
5/16” BOLT CLIP (5)
5/16”-18 x 3” CARRIAGE BOLT, ZP (7)
5/16”-18 FLANGE HEX NUT, ZP (11)
DETAIL 4A
4A
TYP SEAT & FOOT ATTACHMENT:
5/16”-18 x 1-1/4” CARRIAGE BOLT, ZP (8)
5/16” BOLT CLIP (5)
5/16”-18 FLANGE HEX NUT, ZP (11)