Intex CS7111 Krystal Clear Saltwater System 2014 - Manual (Page 6)

SAVE THESE INSTRUCTIONS
Page 2
(189PO) MODEL CS7111 SALTWATER SYSTEM & FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 06/28/2013
English
189
PO
S AVE THESE INSTRUCTIONS
English
Page 6
This product is specially designed for above ground pools. It will destroy the bacteria, oxidize
bather organics and control algae, which provide a safe, clean and comfortable swimming pool.
Common salt (sodium chloride) is made up of two elements, sodium and chlorine. During the
installation of your Saltwater System/Filter Pump, a measured quantity of salt is dissolved in the
pool water to make it slightly salty. The pool water flows through the saltwater system’s
electrolytic cell to produce HCLO. The HCLO dissolves in the water and instantly starts
destroying bacteria and algae. It also oxidizes all other organic materials.
Low voltage direct current is applied to the copper electrode, and copper ions are generated
and dissolved instantly in the water. Copper is an effective algaecide, which will prevent algae
from growing in the pool.
HOW SANITIZER IS GENERATED
Power: 110 - 120 Volt
Amperage: Saltwater System - 0.6 A; Filter Pump - 1.5 A
Ideal Salt Level: 3000 ppm (parts per million)
Maximum Sanitizer Output/hour: 5 grams/hour
Copper Ionizer Output Current: 175 mA
Limited Warranty: see “Limited Warranty”
HOW COPPER IONS ARE GENERATED
PRODUCT SPECIFICATIONS
Flow Sensor
Electrolytic Cell
Water Outlet
Electronic
Control Station