Ss ee tt uu pp ii nn ss tt rr uu cc tt iioo nn ss – Intex 18 FT 8 IN X 53 IN SEQUOIA SPIRIT POOL 2012 User Manual

Page 11

120

SAVE THESE INSTRUCTIONS

Page 11

(120PO) SEQUOIA SPIRIT

WOOD-GRAIN FRAME POOL ENGLISH 7.5” X 10.3” PANTONE 295U 10/06/2011

English

GROUND PREPARATION

Select an outdoor location for the pool which should be on a level concrete pad. If there is no
concrete pad available, follow the instructions below to prepare the installation area. It is
important you ask a professional (builder or gardener) to perform the following ground
preparation.

NOTE: Tools are not included.

1. Mark the installation area

• Once the location area is chosen, drive stake at center point of where you wish pool to

be located. Attach string to center stake. Measure the length A on string, and attach
marking stick, paint marker, or funnel with flour to string. Mark circumference of pool
area using string and marker (see drawing 1.1).

• For 15'8" (478 cm) pool, where

A = 8’3” (251.5 cm) = Radius of grass area need to be removed and leveled.
For 16'8" (508 cm) pool, where
A = 8'9” (266.7 cm) = Radius of grass area need to be removed and leveled.
For 18’8" (569 cm) pool, A = 9'9" (297.1 cm)
see drawing 1.2.

IIOO

POOL SETUP (continued)

1.1

1.2