beautypg.com

Save these instructions, Warning, Pool maintenance & chemicals troubleshooting – Intex 18 FT X 52 IN ULTRA FRAME POOL 2014 User Manual

Page 8: English page 8

background image

118

PO

SAVE THESE INSTRUCTIONS

(118PO) ULTRA FRAME POOL ENGLISH 7.5” X 10.3” PANTONE 295U 06/20/2013

English

Page 8

PROBLEM

DESCRIPTION

CAUSE

SOLUTION

ALGAE

COLORED

WATER

FLOATING

MATTER IN

WATER

CHRONIC LOW

WATER LEVEL

SEDIMENT ON

POOL BOTTOM

SURFACE

DEBRIS

• Greenish water.

• Green or black spots

on pool liner.

• Pool liner is slippery

and/or has a bad odor.

• Water turns blue,

brown, or black when

first treated with

chlorine.

• Water is cloudy or

milky.

• Level is lower than

on previous day.

• Dirt or sand on pool

floor.

• Leaves, insects etc.

• Chlorine and pH level

need adjustment.

• Copper, iron or

manganese in water

being oxidized by the

added chlorine.

• "Hard water" caused by a

too high pH level.

• Chlorine content is low.

• Foreign matter in water.

• Rip or hole in pool liner

or hoses.

• Heavy use, getting in

and out of pool.

• Pool too close to trees.

• Super chlorinate with shock

treatment. Correct pH to your

pool store's recommended level.

• Vacuum pool bottom.

• Maintain proper chlorine level.

• Adjust pH to recommended

level.

• Run filter until water is clear.

• Replace cartridge frequently.

• Correct the pH level. Check

with your pool dealer for advice.

• Check for proper chlorine level.

• Clean or replace your filter

cartridge.

• Repair with patch kit.

• Finger tighten all caps.

• Replace the hoses.

• Use Intex pool vacuum to

clean bottom of pool.

• Use Intex pool skimmer.

Water maintenance

The maintenance of a proper water balance through appropriate use of sanitizers is the single most

important factor in maximizing the life and appearance of the liner as well as ensuring clean, healthy

and safe water. Proper technique is important for water testing and treating the pool water. See your

pool professional for chemical, test kits and testing procedures. Be sure to read and follow the

written instructions from the chemical manufacturer.

1. Never let chlorine come in contact with the liner if it is not completely dissolved. Dissolve granular or

tablet chlorine first in a bucket of water, then add it to the pool water. Likewise with liquid chlorine; mix

it immediately and thoroughly with the pool water.

2. Never mix chemicals together. Add the chemicals to the pool water separately. Thoroughly dissolve each

chemical before adding another one to the water.

3. An Intex pool skimmer and an Intex pool vacuum are available to assist in maintaining clean pool water.

See your pool dealer for these pool accessories.

4. Do not use a pressure washer to clean the pool.

POOL MAINTENANCE & CHEMICALS

TROUBLESHOOTING

REMEMBER TO

• Protect all pool occupants from possible water-related illnesses by keeping the pool water

clean and sanitized. Do not swallow the pool water. Always practice good hygiene.

• Keep your pool clean and clear. The pool floor must be visible at all times from the outside

barrier of the pool.

• Keep children away from pool covers to avoid entanglement, drowning, or other serious

injury.

WARNING

This manual is related to the following products: