beautypg.com

Changing the aspect ratio of the projected image – Casio XJ-M250/XJ-M255* User Manual

Page 16

background image

16

Changing the aspect ratio of the projected image

Press the [ASPECT] key to cycle through the aspect ratio settings for the projected image.
Available settings depend on your projector model as shown below. For details about the meaning of
each setting, see the “Aspect Ratio” setting under “Screen Settings Main Menu” on page 31.

XJ-M240/XJ-M245/XJ-M250/XJ-M255

Pressing the [ASPECT] key will cycle through settings in accordance with the current input source as
shown below.

XJ-M140/XJ-M145/XJ-M150/XJ-M155

Pressing the [ASPECT] key will toggle between settings in accordance with the current input source as
shown below.

Note

z When the input source is a component or an HDMI (DTV) signal with an aspect ratio of 16:9,

the aspect ratio is fixed at 16:9. In this case, pressing the [ASPECT] key will not change the
aspect ratio setting.

z For details about how the aspect ratio setting affects the projected image, see “Aspect Ratio

Setting and Projection Image” (page 48).

z You also can change the aspect ratio setting using the setup menu. For details, see “Aspect

Ratio” under “Screen Settings Main Menu” on page 31.

Important!

Note that enlarging or reducing the size of an image using the [ASPECT] key for commercial
purposes or public presentation may infringe on the legally protected copyright of the copyright
holder of the original material.

Input Source

Pressing [ASPECT] will cycle through these settings:

Video, S-video, Component, HDMI (DTV)

Normal J 16:9 J Letter Box

RGB, HDMI (PC)

Normal J Full J True

Input Source

Pressing [ASPECT] will toggle between these settings:

Video, S-video, Component, HDMI (DTV)

Normal 16:9

RGB, HDMI (PC)

Normal Full