Chaparral K5312/K7313 - Manual (Page 36)

G- and K-Series User’s Guide
4-2
Note: Before you create more than one array, you must be sure that your
host operating system supports multiple Logical Unit Numbers (LUNs).
Most operating systems do, or have an option you can enable to support
multiple LUNs. If your operating system does not support multiple LUNs,
the host will only be able to see one array.
To create an array:
1
From the System Menu, select Add an Array and press Enter.
The Enter Array Name screen displays.
2
Enter a name for the array and press Enter.
You can use up to 35 characters. You can include any characters in the name,
including spaces.
5 3 16
50 6 16
Mirrored 2 16
Table 4-1. Drive requirements by array type (Continued)
RAID Level
Minimum
No. of
Drives
Maximum
No. of
Drives