Chaparral K5312/K7313 - Manual (Page 30)

G- and K-Series User’s Guide
3-2
Set the communications parameters for the terminal program as follows:
To access the Disk Array Administrator software using the RS-232 serial port:
1
From the computer connected to the controller, start your terminal emulation
software.
Be sure that your terminal emulation software is set to use the correct COM port
on your computer. See Terminal Emulator and COM Port Problems on
page 9-1 for more details on how the controller can auto-detect the baud rate.
2
Press CTRL-R.
The initial Chaparral Disk Array Administrator screen displays.
Translations None
Columns 80
Setting Value
Baud rate 115,200
Data bits 8
Stop bits 1
Parity None
Flow Control Software (XON/XOFF)
Connector COM1 (typically)
Setting Value