Char-Broil 466247310 - Manual (Page 24)

16
24
Release the cap from electronic ignition module on cart right side panel. Insert AA battery into ignition module, negative ( – )
end first. Then put on the cap, shown B.
ignition module. Total (2) connections, shown A.
module. Total (5) connections. Connect the two wires {(a) and (b)} from the switch wiring harness to the back of the electronic
Connect each of the wires from the main burner electrodes, and sideburner electrode to the back of the electronic ignition
ignition module
Electronic
wire
NOTE: Switch terminals are larger than electrode
terminals and should only be installed in
location shown as (a), (b).
A
3
(a)
(b)
4
5
1
2
On back of right side fascia, open battery box by sliding its cover. Put two AA batteries in the box and then replace the
Battery box
AA battery
Cover
+
-
Cap AA battery
Right side panel
B
cover,shown C.
C