Char-Broil 466247310 - Manual (Page 21)

8a
13
12
21
#8-32x3/8 " screw
Sideburner lid
Place sideburner lid onto left shelf and align holes in back of lid with hinge holes. Secure lid to hinges using four #8-32x3/8"
screws, 4mm flat washers, 4mm lock washers, and #8-32 hex nuts.
#8-32 hex nut
4mm lock
washer
4mm flat
washer
Insert sideburner burner into left shelf.
shelf, shown A.
sideburner burner
sideburner drip pan
The stud on bottom of burner fits into rear small hole in sideburner drip pan on
Secure burner to sideburner drip pan with one Wing nut, shown B.
Make sure burner tube engages sideburner valve, shown C.
Under sideburner shelf, attach
sideburner ignitor wire to electrode.
A
Wing nut
sideburner drip pan
B
electrode
ignitor wire
burner tube
C
valve