Philips 191TE2L - Manual (Page 4)

1 Notice
2010 © Koninklijke Philips Electronics N.V.
All rights reserved.
Philips and the Philips Shield Emblem are
registered trademarks ofKoninklijke Philips
Electronics N.V. and are used under licence
from Koninklijke Philips Electronics N.V.
Specifications are subject to change without
notice.
Warranty
• Risk of injury, damage to monitor or void
ofwarranty! Neverattemptto repairthe
monitor yourself.
• Use the monitor and accessories only as
intended bythe manufacturer.
• Any operation expressly prohibited in
this manual, or any adjustments and
assembly procedures not recommended
or authorised in this manual shall void the
warranty.
• Warranty coverage begins from the day
you purchase your monitor. Fortwo years
thereafter, your monitorwill be replaced
by at least an equivalent monitor in case
of defects provided by the warranty
coverage.
1
2
Pixel characteristics
This monitor product has a high number
of color pixels. Although it has effective
pixels of 99.999% or more, black dots or
bright points oflight (red, green or blue)
may appear constantly on the screen.
This IS a structural property ofthe display
(within common industry standards) and
IS not a malfunction.
Please referto the Pixel Policy section in
this manual for details.
Mains fuse (UK only)
This monitor IS fitted with an approved
moulded plug. Should it become
necessary to replace the mams fuse, this
must be replaced with a fuse ofthe same
value as indicated on the plug (example
10 A).
Remove fuse cover and fuse.
The replacement fuse must comply with
BS 1362 and have the ASTA approval
mark. Ifthe fuse is lost, contact your
dealer in orderto verifythe correcttype.
Refit the fuse cover.
In orderto maintain conformityto the
EMC directive, the mams plug on this
product must not be detached from the
mams cord cable.
EN