Harbor Freight Tools Model 67980 - Manual (Page 12)

Installation and Connection
SD Card Installation
10
3.3 SD Card Installation
NOTE: The SD card slot provides for additional memory. The SD
card is optional and not included. Different SD cards can be used to
insert into the SD card slot.
145BT
To insert an SD card into the SD card slot, make sure the contacts are
facing towards the slot and the angled portion of the card is facing
down. When the SD card is installed, a small SD card icon will appear
at the top right
portion of the screen. To remove an SD card, gently
push the SD card inward and then release to eject it from the card slot.
16B
3.4 USB Cable Connection
Use the supplied USB cable to connect the tool to a PC to upload and
view captured photos and videos. A “USB Connected” message will
appear on the screen as shown. (Fig. 7)
Fig. 7