Philips g380 User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

To Charge/Recharge
I Fully charge Groomer before using for the first
time or after nomuse for a long period of time.
> Battery perfornunce is best if you recharge
only when the battery is (almost) completely
empty.
I Charging or recharging at temperatures below
40'F or higher than 95'F adversely affects
lifespan of the battery.
I
Continuously recharging Groomer will reduce
lifespan of battery.
n
Be certain Groomer is OFF.
□ You may charge the Groomer:
I In the charging stand by inserting the appliance
plug into the socket located in the bottom of
the charging stand (fig. 2). Place the Groomer
directly on the charging pin in the stand (ftg. 3).
I
By inserting the appliance plug directly into the
Groomer (fig. 4).
Q Plug charging plug into any 120V AC oudet
Use only the cord provided.
□
After a few moments, the Charging Indicator
Light on the power plug will tight to indicate
the Groomer is charging (fig. S).
I
It will cake approximately 10 hours to fully
charge the Groomer for a cordless trimming
time of up to 35 minutes.
I Disconnect the cord and unplug from
electrical outlet.
Optimize the working life of the battery
I
After the Groomer has been charged for
the first time, do not recharge the Groomer
between trimming sessions. Continue using it
until the battery is completely empty.
I Do not charge for more than 24 hours.
I
Do not keep cord permanently plugged in.
I Discharge/run down the battery completely
twice a year by letting the motor run until it
stops.
I
If the Groomer hasn’t been used for a long
period of time, it must be recharged for a
^11 10 hours.
Cordless Trimming
D
Charge according to directions. Unplug
Groomer from outlet
□ Slide ON/OFF switch ON to begin trimming.
B if the battery is empty and you want to trim
your beard, charge the Groomer for at least
3 hours and you will have enough power for
one use (10 minutes).