Philips g380 - Manual (Page 15)

Storage
I Be sure Groomer is turned OFF. Remove
cord from outlet and Groomer/charging stand
before scoring in a safe, dry location where
it will not be crushed, banged, or subject to
damage.
I Score Che Groomer and attachments in the
storage stand to prevent damage.
I Do not wrap cord around Groomer or stand
when scoring.
I Score cord in a safe location where it will not
be cut or damaged.
I Do not place or store Groomer where it can
fall or be pulled into a tub or sink, vsrater or
ocher liquid while plugged in.
Replacing Trimmer Cutting Unit
If voui’ gjttei-s ixxome or worn, do
continuo the C3tc>onn-^r Call l-6CO-?43
Replacing The Mini Shaver Foil
If the shaving foil is worn or damaged, do not
continue using the appliance. Replace the shaving
foil immediately
A worn or damaged shaving foil should only be
replaced with an original Philips shaving foil. Call
1*800-243-3050 for assistance.
D
Remove the detachable shaving head by
pulling it from the appliance (fig. 28).
Q Remove the shaving foil by pushing it out of
the shaving head (fig. 31 ).
□ Place the new shaving foil carefully in the
shaving head (fig. 32).
D When the shaving foil is properly positioned,
push it into iu end position with your finger
(fig. 33).
Ropl.Tcing The- Mini Sii.ivi'r Cutter
If the mini shaver cutter is worn or damaged, do
not continue using the appliance. Replace the mini
foil cutter and the shaving foil immediately
A worn or damaged mini shaver cutter should
only be replaced with an original Philips cutter.
Call I-8(X)-243-3050 for assistance.
D Remove the detachable shaving head by
pulling it from the appliance (fig. 28).
Q Remove the old mini shaver cuner by pulling
it from the appliance (fig. 34).
□ Make sure that the spring within the driving
unit does not get lost.
□ insert the new mini shaver cutter carefully
into the driving unit (fig. 35).
B When the mini shaver cutter is property
positioned, push it into its end position witii
your finger.
Q Replace the detachable shaving head on the
appliance or place it in the storage stand.