Philips ND 6600 - Manual (Page 9)

7. CASSETTE DECK
CASSETTE RECORDING
• Press STOP/EJIECT) to open the cassette
holder.
• Insert the cassette.
• When monitoring during re­
cording, adjust the sound
using the controls
VOLUME
and TONE. These controls
do not affect the recording.
• To start recording, press RECORD and
PLAY at the same time.
- When the end of the tape is reached, the
recorder buttons are released.
• To interrupt recording press PAUSE.
• To continue recording, press PAUSE again.
• Press STOP if you want to stop recording
before the end of the tape. On pressing
again, the cassette holder will open.
• The set is switched off if the MODE
selector is in position TAPE and no buttons
are pressed.
Recording from the CD-player
• Set the FUNCTION selector to CD.
It's not necessary to start the CD-player se­
parately: by pressing REC(ORD) the CD-
player starts automatically:
- if the CD-player is in position STOP,
recording will start from the beginning of the
CD (or from the beginning of the program­
med selection):
- if the CD-player is in the PLAY mode or/at a
certain track location (r«/Vw), recording will
start from the beginning of that track.
Recording from the radio
• Set the FUNCTION selector to RADIO.
• Select the wave band using the BAND switch.
• Tune to desired radio station using the
TUNING control knob.
• In case of FM radio recordings, set the
MONO/STEREO switch to the desired
position, (not all versions).
• If during the recording of a MW station, a
whistling sound is heard, this sound can be
suppressed by setting the BEAT CANCEL
switch to another position.
Mono recording from the built-in
microphone
• Set the FUNCTION selector to TAPE
• Set the VOLUME control to the minimum
volume level (during microphone recording,
monitoring is not possible).
Starting and stopping the recording
• Start recording by pressing RECORD.
• For brief interruptions, press PAUSE.
To restart recording, press this button once
more.
• To stop recording, press STOP. On pressing
again, the cassette holder will open.