Philips CDC 486 - Manual (Page 5)

BEGINNING WITH A DISC OTHER THAN THE
FIRST {DISC SELECT or - DISC + and
PLAY-PAUSE)
• Key in the number of the required disc or press
’ — ’ or' + ’ until the number appears above DISC.
• Press PLAY-PAUSE.
> The ’> 'indication lights up and play begins with
the selected disc.
BEGINNING WITH A TRACK NUMBER OTHER
THAN THE FIRST
(PREVIOUS TRACK NEXT and PLAY-PAUSE)
• Key in the number of the required disc or press
’ — ’ or ’+’ until the number appears above DISC.
• Press NEXT or PREVIOUS untilthe requiredtrack
number appears above TRACK.
• Press PLAY-PAUSE.
> The ’> 'indication lights up and play will startfrom
the selected track.
RANDOM PLAYBACK (SHUFFLE)
• Press SHUFFLE before or during play.
> The SHUFFLE indication lights up.
> All tracks are now played in random order.
If you also press REPEAT then play is repeated in a
different order each time.
If you press NEXT then play continues with any
other track.
If you press PREVIOUS then the track playing is
restarted.
Searching for a particular passage is limited to
within the track being played.
• Press SHUFFLE again if you wish to return to
normal play.
> The SHUFFLE indication goes out.
BRIEFLY INTERRUPTING PLAYBACK/HOLDING
PLAY AT THE START OF A DISC, TRACK OR
PASSAGE (PLAY-PAUSE)
To briefly interrupt playback
• Press PLAY-PAUSE.
> The PAUSE indication lights up.
> The sound stops but the disc continues to spin.
• Press PLAY-PAUSE again to restart.
> The PAUSEindication goes out.
> Play restarts atthe point where it was interrupted.
Holding play atthe start of a disc, track orpassage
You can go to any place on a disc and hold it by
pressing PLAY-PAUSE before:
- starting to play a disc;
- going back to the beginning of a track;
- selecting another disc or track;
- searching for a particular passage;
- beginning with a disc or track other than the first.
Press PLAY-PAUSE again to start play at the cho­
sen place.
REPEATING PLAY (REPEAT)
• Press REPEAT before or during playback.
> The HEPEATindication lights up.
> All discs are repeated over and over.
• Press REPEAT again to stop repeating.
> The HEPEATindication goes out.
> Play will continue as normal.
Repeating can also be stopped by pressing STOP-
CLEAR or OPEN/CLOSE.___________________
STOPPING PLAYBACK
(STOP-CLEAR or OPEN/CLOSE)
• Press STOP-CLEAR if you merely wish to stop.
> The '>'indication goes out and you will see again
the number of the first disc above DISC and the
number of the first track on it above TRACK.
• Press OPEN/CLOSE if you wish to stop and take
out the cartridge.
> The '>' indication goes out and the dISC in­
dication lights up.
PROGRAMMING
By programming the changer you can play up to
30 tracks in any required sequence. If you exceed
the maximum of 30 tracks, 'Err'appears.________
STORING A PROGRAMME
Before playback
• Key in the number of the required disc or press
'—' or ’ -F' until the number appears above DISC.
• Press NEXT or PREVIOUS until the first track
number you wish to programme appears above
TRACK.
• Press PROGRAM.
> The PROGRAM indication lights up and 'P T
appears; the track number has now been stored
in the changer's memory.
• Select the remaining required track numbers of
the disc and store each number by pressing
PROGRAM.
> Each time you store a track 'P' will appear,
followed by the number of tracks stored.
• If you wish to store tracks from another disc, you
should first enter the number of the disc.
During playback
• Press PROGRAM for every track number you
wish to include in the programme.
> Each time you record a track number 'P' will
appear, followed by the number of tracks stored.