Clarion CX609 - Manual (Page 35)

English
35
CX609
8. ERROR DISPLAYS
If an error occurs, one of the following displays is displayed.
Take the measures described below to eliminate the problem.
If an error display other than the ones described above appears, press the reset button. If the problem
persists, turn off the power and consult your store of purchase.
Error Display Cause Measure
C
D
/M
P
3
/W
MA
/AAC
ERROR 2 A CD is caught inside the CD
deck and is not ejected. This is a failure of CD deck’s mechanism and consult
your store of purchase.
ERROR 3 A CD cannot be played due
to scratches, etc. Replace with a non-scratched, non-warped-disc.
ERROR 6 A CD is loaded upside-down
inside the CD deck and does
not play. Eject the disc then reload it properly.
CD ch
ang
e
r
ERROR 2 A CD inside the CD changer
is not loaded. This is a failure of CD changer’s mechanism and
consult your store of purchase.
ERROR 3 A CD inside the CD changer
cannot be played due to
scratches, etc. Replace with a non-scratched, non-warped disc.
ERROR 6 A CD inside the CD changer
cannot be played because it
is loaded upside-down. Eject the disc then reload it properly.
USB/MTP
/iPo
d
ERROR 2 The files are not proper MP3/
WMA/AAC format. Use only properly encoded MP3/WMA/AAC files.
ERROR 3
(USB/MTP mode) The MP3/WMA/AAC files are
improperly encoded. Use only properly encoded MP3/WMA/AAC files.
CUR ERR Overcurrent detection. Disconnect the devices and reconnect. If the devices
are still not recognized, try replacing with a different
devices.
HUB ERR Do not support the HUB
devices. Do not use the HUB devices.
CX609_ENG.book Page 35 Tuesday, January 13, 2009 10:52 AM