Clarion CX609 - Manual (Page 13)

XM Satellite Radio Operations
English
13
CX609
Tuning mode
There are two channel selection modes: quick
tuning mode and step tuning mode.
Quick tuning
1. Press and hold the [
x] or [v] button for
1 second or longer.
2. Press the [ ] button to switch to another
channel.
Step tuning
1. Press the [
x] or [v] button.
2. Press the [ ] button to switch to another
channel.
Recalling a preset station
A total of 18 satellite radio stations can be
stored.
6-XM1, 6-XM2 and 6-XM3
This allows you to store your favorite satellite
radio stations in memory for later recall.
1. Press the [BND] button to select the desired
band.
2. Press the [
w] / [z] button or [DIRECT]
button to select the desired preset station.
Preset memory
1. Press the [BND] button to select the desired
band.
2. Select the desired channel with quick tuning
or step tuning.
3. Press and hold the [DIRECT] button for
2 seconds or longer to store the current
channel into preset memory.
Receiving stations selected by
category
Satellite Radio allows you to select broadcast
channel category (contents).
1. Press and hold the [BND] button for
1 second or longer to select the category
selection mode.
∗ If press and hold the button for 1 second or
longer once again, return to the channel
selection mode.
2. Press the [
w] or [z] button to change the
category item and press the [ ] button to
switch to another categoty.
3. Press the [
x] or [v] button to tune in a
station and press the [ ] button to switch to
another channel.
Note:
• When the category selection mode is entered,
the category of the last received channel is
displayed first.
• The category selection mode is canceled when
no channel with the selected category can be
found.
• If no operation is performed whithin 15 seconds,
the category selection mode is canceled, and
resumes to the channel mode.
• Press and hold the [DIRECT] button for 2
seconds or longer to store the current station into
preset channel memory.
• If you press the [
w
] / [
z
] button or [DIRECT]
button in the category mode, can recall the
preset channel station.
Scan function
There are two scan modes: the category scan
mode and the preset scan mode.
During scanning channels are displayed in
abbreviated form, the display mode cannot be
switched.
Preset scan (PRESET SCN)
A preset scan scans the channels (up to 18
channels) stored in the preset memory about
every 10 seconds.
1. Press and hold the [ ] button for 1 second
or longer to select the preset scan mode.
And start the preset scanning.
Category scan (CAT SCN)
In a category scan, broadcast channels in the
same category as the current channel are
selected about every 10 seconds.
1. Press and hold the [BND] button for 1
second or longer to select the category
mode.
2. Press and hold the [ ] button for 1 second
or longer to select the category scan mode.
And start the category scanning.
Note:
Category scanning is not available when no
category is defined for the current channel.
CX609_ENG.book Page 13 Tuesday, January 13, 2009 10:52 AM