Clarion CX609 - Manual (Page 30)

English
30
CX609
SIRIUS Satellite Radio Operations
This function is available when a Satellite Radio
Receiver is connected through the CeNET
cable.
This unit can control the following satellite radio
receivers:
• SIRIUS Satellite Radio Receiver : SIRCL3
• SIRIUS Satellite Translator Adapter :
CLA-SC1 (which needs Sirius universal Tuner
sold separately.)
Notes:
• When the function is differ depending to the
connected receiver, they are distinguished by
the following notations:
“SIRIUS”: for a SIRIUS Satellite Radio Receiver
Selecting a Satellite Radio mode
1. Press the [SRC] button.
The system changes to the specified
Satellite Radio mode.
Selecting a band
1. Press the [BND] button to select a band.
This changes the reception band as follows:
SR1
➜ SR2 ➜ SR3 ➜ SR1 ...
● Information displayed during reception
The following information is displayed when the
satellite radio cannot be received normally.
• When the receiver is turned on the first time
or after a reset: “UPDATING”
• When a channel is being tuned in (no signal is
yet received): “LINKING”
• A channel without a broadcast has been
selected: “INVALID CH”
• A channel not covered by your contract:
“CALL 888”
↔ “539-SIRI” (alternated)
Confirming your SIRIUS ID
1. Press the [
x] or [v] button to switch to
channel 0.
2. Press the [DISP] button until the SIRIUS ID
appears in the diaplay.
Displaying channel labels
1. Press the [DISP] button to select the desired
channel label.
Channel
➜ Category ➜ Title (Artist) ➜ Radio
text
➜ Channel...
Channel selection
1. Channels are selected with the [
x] or
[
v] button.
∗ For details, see the following operation
descriptions.
Note:
• The audio output is muted and other button
operations are not accepted during channel
selection.
Tuning mode
There are two channel selection modes: quick
tuning mode and step tuning mode.
● Quick tuning
1. Press and hold the [
x] or [v] button
(1 sec.).
● Step tuning
1. Press the [
x] or [v] button.
Recalling a preset station
A total of 18 satellite radio stations can be
stored.
6-SR1, 6-SR2 and 6-SR3
This allows you to store your favorite satellite
radio stations in memory for later recall.
1. Press the [BND] button to select the desired
band.
2. Press the [
w] / [z]
button or [DIRECT]
button to select the desired preset station.
Preset memory
1. Press the [BND] button to select the desired
band.
2. Select the desired channel with quick tuning
or step tuning.
3. Press and hold the [DIRECT] button (2 sec.)
to store the current channel into preset
memory.
CX609_ENG.book Page 30 Tuesday, January 13, 2009 10:52 AM