Philips AZ 6804 - Manual (Page 9)

MAINTENANCE CONNECTIONS
• The lens 0 (fig. 3) should never be cleaned.
• The lens may steam up when the set is taken from a
cold into a warm environment. Playing a disc is not
possible then. Do not clean the lens, but let the set
acclimatize for a while.
• Always pick up the disc by the edge and put it back
in its box immediately after use.
• To remove dirt from a disc, first breathe on the disc
and wipe it off in a straight line from centre to edge
(fig. 4) using a soft, lint-free cloth. The use of cleaning
agents may harm the disc.
• The mechanism of the CD-player is fitted with
seif-lubricating bearings and therefore must not be
oiled or greased.
• Fingerprints, dust and dirt on the apparatus can be
removed using a soft, clean and slightly damp leather
cloth. Do not use any cleaning agents which contain
abrasives or solvents such as benzine thinner, alcohol,
refined petrol or ammonia, since they may affect and
harm the cabinet.
• Do not expose the set. batteries or discs to rain or
moisture, or. for any great length of time, to excessive
heat from heating equipment or direct sunshine, e.g. in
cars parked in the sun.
• Keep the set and the discs away from sand.
Headphone socket jf)
For stereo headphones (or mini loudspeakers) with
3.5 mm plug.
CD LINE OUT socket
For CD-reproduclion through your stereo system
(amplifier, receiver, recorder, etc.). Use the supplied
signal lead, type SBC 1059, to connect the CD LINE
OUT socket to the input sockets REC IN. TAPE IN.
LINE IN. AUX or CD IN of the other set.
Set the VOLUME control to
T and the DBB BASS
button to OFF.
REMOTE socket
For the optional remote control, type SBC 6292, with
the functions PLAY t>. PAUSE 03. STOP and kM
SEARCH W.