Hold scan – Philips AZ 6804 User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
HOLD
SCAN
When carrying the player with you. you can set the
HOLD switch to position ON. The CD-buttons are then
Inoperative (except for the REMOTE control buttons).
Now, playing a disc is not interrupted when a button is
accidentally touched.
For operating the normal CD-buttons. place the HOLD
switch to position OFF again.
The SCAN function can be switched on from the STOP
and PLAY mode.
e Press SCAN; the word SCAN appears. Only the first
few seconds of each track are played,
e The moment you press PLAY >, the SCAN function
is defeated (the word SCAN disappears) and the disc
is played in the normal way from this track number.
• If you press hW or KM, the SCAN function remains
operative and the beginning of the next WH or previous
KM track is played for a few seconds.
• If the SCAN function is not defeated by pressing
PLAY > or STOP, the CD-player automatically returns
to STOP as soon as the end of the disc is reached.
11