Philips AZ 6804 - Manual (Page 13)

PROGRAMMING TRACK NUMBERS
You may select a number of tracks and store these in
the memory in the desired sequence. When playing,
you will only hear the stored titles in the selected
sequence. At most, 20 tracks can be stored in the
memory. You may store each track more than once.
Manual selecting
• Press PLAY t> and alter that STOP.
• Select the desired track using the buttons kw and MH
until the display shows the required track number.
• Store this track by pressing STORE briefly.
• Select and store in this way all desired titles.
Storing during SCAN
• Press SCAN to play the first few seconds of each
track.
e Press STORE briefly as soon as you recognize a
desired title.
Storing during PLAY
• During normal PLAY you may store the running title
by pressing STORE briefly.
-After pressing STORE briefly the character ’P’
(PROGRAM) appears, indicating that the track has
been stored.
- Store all desired titles in the required sequence. You
may store each track more than once.
-At most 20tracks can be stored in the memory.
When the memory is full, the character 'F' (FULL)
appears.
-When pressing STORE longer than 1 second, the
display will show in sequence all stored track numbers.
- You can simply erase the whole memory by pressing
STOP for a second time: the character ’O’ tor CLEAR
appears now.
The contents of the memory are also erased:
- by opening the disc cover;
- if the set shuts down automatically (3 minutes after
STOP):
- if the batteries get exhausted or if the power supply
is interrupted in another way.
How to play the stored selection
To play your selection, the CD-player should be in
position STOP; then press PLAY >; now. the word
MEMORY appears.
13