Philips CD 630 - Manual (Page 6)

SELECTING ANOTHER TRACK DURING PLAY
(’1-0’, NEXT or PREVIOUS)
• Put the player In the direct play mode using PROGRAM/PLAY.
> PLAY lights up above DIRECT.
• Key in the desired number (numbers consisting of two figures
must be keyed in within 2 seconds) or press NEXT or
PREVIOUS until the number appears under TRACK.
> The music stops and a moment iater the seiected track begins
to play.
DISC END will light up if you press NEXT whiie playing the last
track.
DISC BEGINmW light up if you press PREVIOUS while playing the
first track.
WRONG TRACK will light up if you seiect a non-existent number
with the ’1-0’ digit keys.________________________________
SELECTING ANOTHER INDEX NUMBER DURING PLAY
«] INDEX D)
Important!
Index numbers are not indicated specifically on the display. If the
parts of a track have index numbers, this will be specified in the
track list in the disc hoider.
• Press INDEX D or <3 INDEX until the required index number
appears under INDEX.
> The music stops and a moment later the selected index number
begins to play.
If the index number seiected does not exist, piay wili start again at
the beginning of the current index number._________________
SEARCHING FOR A PARTICULAR PASSAGE DURING PLAY
(«i CURSOR and CURSOR »)
• Hold CURSOR down to search backwards to the beginning.
• Hoid CURSOR W> down to search forwards to the end.
As soon as the key is released play restarts at once. As soon as
you reach the beginning of the first track, a ’P’ appears on the
display; then, following a two-second pause, DISC BEGIN iights
up and piay wili resume there as soon as you release the key. If you
reach the end of the last track, DISC ENDw\W light up. If you then
release the key, play will resume a few seconds before the end of
the disc.
At this search speed sound is audibie.____________________
FAST SEARCH FOR A PASSAGE
(FAST and )
• Press FAST.
> FASriights up.
• Now press t> within 2 seconds.
• Hold the key down; if you release the key briefly, searching wili
resume at the lowest speed.
At this search speed no sound is audible.__________________
SCANNING A DISC (SCAN)
• Press SCAN before or during play.
> SCANNING lights up.
> If the tray was open, it will now close.
> The first 20 seconds of each track are piayed in turn.
• When the player reaches a track which you wish to hear in full,
press PLAY/REPLAY.
• Press SCAN again to end the scanning.
> SCANNING then goes out and play continues as normal.
During scanning the digit keys ’1-0’, NEXT and PREVIOUS can be
used.
BEGINNING WITH A PARTICULAR TRACK NUMBER
With the digit keys ’1-0’
• Put the player in the direct piay mode using PROGRAM/PLAY.
> PLAY iights up above DIRECT.
» Key in the required number (numbers consisting of two figures
must be keyed in within 2 seconds).
> The number appears under TRACK.
)• On the number indicator the selected track number and those
following it iight up.
> PLAYiights up and piay starts from the selected track.
WRONG TRACK lights up if you select a non-existent number.
With NEXT or PREViOUS
• Press NEXT or PREVIOUS until the required number appears
underTRACK. If you wish to begin with the highest number, you
must still press PREVIOUS once.
• Press PLAY/REPLAY within 7seconds.
> On the number indicator the seiected track number and those
following it light up.
> PMYiights up and play starts from the selected track.______
BEGINNING WITH A PARTICULAR INDEX NUMBER
(
Important!
Before selecting an index number you must first select a track
number. If you select the track number with the digit keys ’1-0',
then no more than 2 seconds may elapse between the pressing
of the different keys. If you select the track number with NEXT or
PREViOUS, then no more than 7 seconds may elapse betv/een
the pressing of the different keys.
• Select the track number you wish to start with.
> Then press iNDEXDor<] INDEXuntilthedesiredindexnumber
appears on the display.
• Press PLAY/REPLAY.
> PLA/lights up and piay starts from the seiected index number.
If you select a non-existent index number, piayback starts with the
selected track._______________________________________
PLAYING THE DISC IN RANDOM ORDER (RANDOM)
• Before or during piay press RANDOM.
> The RANDOM indication iights up.
> if the tray was open, it wili now close.
> All the tracks on the disc are now played in a sequence to be
determined by the player.
> Press RANDOM again if you wish to return to normal play.
If during piay you press PREVIOUS you will return to a track which
has already been played. If you press NEXT you are selecting any
one of the foilowing tracks. If you press PREVIOUS during the first
track or NEXT during the last track, ERROR will light up.
By pressing REPEAT you can repeat random-order play. The
player then always begins with the same track, but otherwise
changes the sequence every time the disc is repeated.
The digit keys ’1-0’ cannot be used during random-order play.
If you only wish to hear the first 10 seconds:
• Press FAST and then SCAN.
> FAST SCA/V lights up.
> The first 10 seconds of each track are piayed in turn.
• When the player reaches a track which you wish to hear in fuli,
press PLAY/REPLAY.
• Press SCAN again to end the scanning.
> FAST SCAN then goes out and piay continues as normai.