English, Supply, Playing back cassettes – Philips AQ6494 User Manual

Page 4: Fast winding

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

English

SUPPLY

PLAYING BACK CASSETTES

MAINTENANCE

Batteries: Insert as indicated tivo alkaline battenes, type R6,

UM3 or AA. Remove the batteries il exhausted or II they are not

to be used for a long time.

Mains adapter: Connect a mams adapter to the 3 V D C

socket The adapter must supply 3 V DC ©-©-©, minuspole

• Connect headphones to iHi PHONES.
• Open the cassette holder and insert the cassette in it with
the open part facing the buttons and the full reel on the nght.
• To start playback, press

PLAY

• Adjust the sound with VOLUME and DBB (bass).
• To stop, press ■ STOP and the set is switched off.

• At the end of the tape the

PLAY button is automatically

released and the set is switched off.

• Clean the magnetic head after eve^ 50 hours of operation

or, on average, once a month by playing through the cleaning
cassette SBC 114.

• Do not expose the set and cassettes to rain, moisture, sand,

or to excessive heat from e.g. heating equipment or in motor
cars parked in the sun.

This set complies v/ilh the radio interference requirements of the

European Community

The type number will be found at the back of the set and the serial number

in the battery compartment.

FAST WINDING

Press ■« F.FWD or ►► REWIND, Press ■ STOP to stop fast

winding and also tvhen the tape has reached its end.