Philips CD 115 - Manual (Page 8)

PROGRAMMING OTHER POSSIBILITIES
m
3
«>'
3 "
ERASING A PROGRAMME
(STOP/CM or OPEN/CL)
RECORDING FROM YOUR CD PLAYER (EDIT)
• Press STOP/CM twice, or, if the CD has already
stopped, just once; you can also press OPEN/-
CL(ose) straight away.
- The programme has now been erased.
ERASING A TRACK FROM A PROGRAMME
(K TRACK Hand PROGRAM)____________________________
• Press ►) or !◄, before or after programmed
play, until the number you wish to erase ap­
pears on the display.
• Press PROGRAM within 8 seconds.
- The Rafter the number disappears; the number
has now been erased.
In the EDIT mode you can store the tape length
in the player memory. This will then determine
which tracks fit on one side of the tape and a
pause will automatically be inserted after the
last track,
NOTE!
- As soon as you press PLAY/REPLAY, the
other player functions (except STOP/CM and
OPEN/CL) will temporarily be switched off to
prevent the recording being interfered with
- Should the CD be longer than the total tape
length, play will stop after the last track that
fits on side B of the tape.
Press EDIT (in STOP mode).
C 90 lights up.
With W and !◄ you can now select the required
tape length: C30, C46, C60, C 90 or C 120;
other tape lengths can be selected using the
◄◄ SEARCH ►► keys.
You can now record the CD.
Press PLAY/REPLAY.
> lights up and play begins.
After each track a 5 second pause will be in­
serted.
Play will stop after the last track.
PAUSE lights up and i> starts flashing.
Turn the tape over.
Press PLAY/REPLAY.
The remaining tracks will now be played.