Operation programming – Philips CD 115 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
OPERATION
PROGRAMMING
PLAYING IN A RANDOM ORDER
(SHUFFLE)
• Press SHUFFLE before or during play.
- If the CD compartment was open it will now
clos6
- SHUFFLE lights up.
- The tracks are now played in a random order.
• Press SHUFFLE again if you wish to revert to
normal play.
If you press !◄, you will return to a track which
has already been played.
If you press ►), you are selecting any other track.
If you press REPEAT, the tracks will be repeated ,
in a different order each time.
REPEATING A PASSAGE
(A-B)
• During play press A-B at the required starting
point.
- A lights up.
• Press A-B again at the required stopping point.
- B lights up. The passage between points A and
B will now be replayed continuously.
• Press A-B again if you wish to return to normal
play.
To find the starting and stopping points quickly,
you can use the SEARCH ►>- keys.
REPEATING THE CD
(REPEAT)_______________________
• Press REPEAT before or during play.
- REPEAT lights up and the CD will now be re
peated again and again.
• Press REPEAT again to stop the REPEAT func
tion.
You can store 20 tracks from each CD in any re
quired sequence in a programme. If you exceed
the maximum of 20 tracks,
FULL
lights up.
STORING A PROGRAMME
(H TRACK ►! and PROGRAM)__________________________
• Close the CD compartment by hand or by
pressing OPEN/CL(ose).
- The display shows the number of tracks and
the playing time of the CD.
• Press IH or !◄ until the first track number you
wish to programme appears under TRACK.
• Now press PROGRAM
within 8seconds.
-
PROijRAM lights up, followed by a P (for Pro
gramme); the numlDer has now been stored in
the player's memory.
• Select the other track numbers required and
store each track by pressing PROGRAM.
STORING A PROGRAMME USING SCAN
• Press SCAN before or during play.
- If the CD compartment was open, it will now
close.
- SCAN lights up and the first 10 seconds of
each track are played in turn; ten seconds are
counted down each time under TIME.
• Press PROGRAM at each track you wish to in
clude in the programme.
- The player immediately starts to play the first
10 seconds of the next track.
• Press PLAY/REPLAY to play the programme.
CHECKING THE PROGRAMME
(PROGRAM)
• Press PROGRAM before, during or after
programmed play.
- 'r' (for review) lights up and all the track num
bers appear in the programmed sequence on
the display.
PLAYING THE PROGRAMME
(PLAY/REPLAY)
• Press PLAY/REPLAY.
- /> lights up and play begins with the first num
ber of the programme.
All keys can be used during programmed play (ex
cept SHUFFLE and A-B; the programme will then
be erased).
Searching for a passage is limited to within the
track being played.
S)
c
LU