Philips CD 115 - Manual (Page 6)

OPERATION
DISPLAY (Fig. 3)
3
(Q
(A
3 "
TRACK - Indicates the track number being play­
ed; shows how many tracks there are on the CD.
>
- Lights during play;
- Flashes when play is interrupted (PAUSE).
TIME - Indicates the elapsed playing time of the
track being played.
TOTAL TIME - Indicates the total playing time of
a CD.
PROGRAM - Lights up when a programme is be­
ing stored.
SCAN - Lights up when the first 10 seconds of
each track are played.
SHUFFLE - Lights up when the tracks are played
in random order.
A-B - Lights up when a passage is repeated.
REPEAT - Lights up when the entire CD or a pro­
gramme is repeated.
EDIT - Lights up when the player is put in the
EDIT mode.
ERRior) - Lights up if you:
- make an error in operating the player;
- try to start play when the CD is inserted with
the printed side facing down or if the CD is
damaged.
disc-
Lights up if you try to start play without a
CD in the CD compartment.
OPEN- Lights up when you open the CD com­
partment.
PLAYBACK (PLAY/REPLAY)
• Open the CD compartment by pressing
OPEN/CLOSE.
• Insert a CD in the CD compartment, printed
side up (Fig. 4).
• Close the CD compartment by hand or by
pressing OPEN/CL(ose).
- Press PLAY/REPLAY.
- flights up and playback starts.
You can also press PLAY/REPLAY immediately
after inserting the CD; the CD compartment
then closes automatically.
- The track being played is always shown under
TRACK and its elapsed playing time is shown
under TIME.
- After the last track play stops.
- The display shows the number of tracks and
the playing time of the CD.
You can interrupt playback by pressing PAUSE;
PAUSE then lights up and i> starts flashing. Press
PLAY/REPLAY to restart.
If you press PLAY/REPLAY
during play, the cur­
rent track starts again from the beginning.
You can stop playback by pressing STOP/CM or
OPEN/CL(ose).
IMPORTANT!
- The lens of the laser (fig. 5) should never be
touched!
- If none of the player functions are used for
two minutes, the player will switch to STAND
BY.
The same will happen if you hold the STOP/-
CM key pressed down for two seconds.
The information will then disappear from the
display.
Press any button to switch the player back on
again.
To switch off the player
fully, remove the
plug from the wall socket.
SELECTING ANOTHER TRACK DURING
PLAY (H TRACK M____________________________________
• Press H or !◄ until the desired track number
appears under TRACK.
- The music stops and a moment later the selec­
ted track begins to play.
FAST SEARCH FOR A PASSAGE
(◄◄ SEARCH ►►)
Hold
Hold
down to search backwards,
down to search forwards.
The searching speed is determined by how long a
key is pressed:
- the first 2 seconds fairly slowly, with sound;
- then at maximum speed, with no sound.
If you reach the end of the last track of the CD
and release ►►, play will resume a few seconds
before the end.
STARTING WITH A PARTICULAR TRACK
TRACK ►! and PLAY/REP AY)______________________
• Close the CD compartmeiit by hand or by
pressing OPEN/CL(ose).
- The display shov\/s the number of tracks and
the playing time of the CD.
• Press IH or !◄ until the desired track number
appears under TRACK.
• Now press PLAY/REPLAY within 8 seconds.
- Play starts from the selected track.
SCANNING THE DISC (SCAN)_______________________
• Press SCAN before or during play.
- If the CD compartment was open, it will now
close.
- SCAN lights up and the first 10 seconds of
each track are played in turn; 10 seconds are
counted down each time under TIME.
• When the player reaches a track which you
wish to hear in full, press SCAN again
During scanning, the !◄ TRACK ►! keys can be
used.