Interlogix Simon XT Rev B - Manual (Page 2)

2 Simon XT Talking Touch Screen Quick Operation Guide
Doors. Depicts monitored door status (most typically
external doors). A green check indicates all monitored
doors are closed. A red exclamation point indicates one
or more doors are open.
Windows. Depicts monitored window status. A green
check indicates all monitored windows are closed. A red
exclamation point indicates one or more windows are
open.
Motion. Depicts motion detected by the motion sensors
in your home. A green check indicates no recent motion
detected. A red exclamation point indicates motion was
detected within the last 10 minutes. A typical use for this
feature would be to have a touch screen in the garage to
see if movement is detected in the home before you
enter the home.
Property. Depicts other changes to protected property in
your system. For example activation of a water sensor,
freeze sensor, or the movement of protected items. A
green check indicates no change since the last time you
visited (for movement of a protected item) and all sensors
are closed (water or freeze sensors). A red exclamation
point indicates either a sensor is tripped or there is
unacknowledged activity.
Note: These icons may contain the text “N/A” which indicates
your system is not configured to support this feature. Consult
your dealer for additional information.
Arming icons
The arming icons are located below the home status icons.
The icons indicate the armed status of the security system.
PRESS TO ARM. When the icon shows
“PRESS TO ARM”, touch to access the Arm
screen.
or
PRESS TO DISARM. One of these icons will
display depending on your arming level. Press
to disarm your system (door, window, and/or
motion sensors). Enter your code in the
keypad screen that appears. If you enter an
incorrect code, press the Clear button and
enter the correct code.
Arming screen
When you touch the PRESS TO ARM icon on the Home
screen, the Arm screen appears with the following arming
choices:
Arm All (Away). This is the typical selection
when you are leaving the home. The doors,
windows, and motion sensors will be armed
and the arming countdown will appear at the
bottom of the screen.
Arm Doors+Windows Only (Stay). This is
the typical selection when you are staying
home. The doors and windows will be armed
and the arming countdown will appear at the
bottom of the screen.
Motion Sensors Only (Away). This is the
best selection if you are leaving the home,
but want to keep a door or window open
while you are gone. Only the motion sensors
will arm and
the arming countdown will appear at the
bottom of the screen.
Note: Depending on your configuration, this
button may or may not appear.
Optional arming choices
These settings are optional (for more advanced arming
features).
Silent arming. Press this button to silence your exit beeps
during arming. (Your exit time will double).
No delay. Press this button to set your entrance timer to zero.
(Use the No Delay feature when you are asleep, or when you
are away from home and will carry a wireless touchpad that
allows you to disarm the system before opening a protected
door). When you select the No Delay option, an icon (a clock
with a slash through it) will appear over the lock.
Arming errors
If you select an arming option on the Arm screen, and there is
an arming problem, an arming error message will appear at the
bottom of the screen, indicating what the problem is and how
to correct it. For example, you might see a message that
indicates that you need to close the front door.
Correct the problem as indicated or press the Bypass button.
You will see the arming countdown message at the bottom of
the screen. You can touch the Cancel button and enter your
code to stop the arming process.
Settings screen
When you touch the Settings icon on the Home screen,
the Settings screen appears.
Touch screen status icons
The touch screen status icons in the upper left corner of the
screen represent the health of this touch screen: