Interlogix TruVision IP Open Standards Outdoor Cameras Installation Manual - Manual (Page 16)

EN 16 Installation Manual
Using the camera with an Interlogix NVR or Hybrid
DVR or another system
Please refer to the NVR/DVR user manuals for instructions on connecting and
operating the camera with these systems.
Using the camera with TruVision Navigator
A camera must be connected to an Interlogix NVR or hybrid DVR in order to be
operated by TruVision Navigator. Please refer to the TruVision Navigator user
manual for instructions on operating the camera with the TruVision Navigator.
Specifications
TruVision outdoor IP dome cameras
Electrical
Voltage input 24 VAC ± 10%
PoE (IEEE 802.3af - heater will be disabled)
High PoE (802.3at)
Power consumption Max. 12 W (w/o heater)
Max. 24 W (heater on)
Miscellaneous
Connectors AC jack flying lead, RJ45 flying lead
Operating temperature -40 to +60 °C (-40 to +140°F) with heater and fan on
Dimensions (D × H) Φ 159.8 × 146 mm (Φ 6.29 × 5.75 in.)
Weight 2100 g (4.62 lbs)
Environmental rating IP66
Network
Protocols TCP/IP, HTTP, DHCP, DNS, DDNS, RTP/RTSP,
PPPoE, SMTP, NTP, UPnP, ICMP, IGMP, SNMP,
FTP, 802.1x, QoS, HTTPS