Interlogix UVC-6130-1 User Manual - Manual (Page 7)

UltraView UVC-6130-1 WDR Box Camera User Manual 5
Installation
Please check the package contents and make sure that the device in the
package is in good condition and all the assembly parts are included.
To install the camera you will need to prepare the mounting surface, mount the
camera, attach the lens, and make cable connections,
Note: Before installing, please ensure that the mounting surface is strong enough
to withstand three times the weight of the camera. If the mounting surface is not
strong enough, the camera may fall and cause serious damage.
Connect the video cable
Connect a coaxial cable from the camera’s BNC connector to a CCTV monitor or
video recording device.
Attach the lens
Refer to the instructions that came with the lens you purchased for complete
installation instructions of that lens.
Note: For optimal performance, use an auto iris lens.