Interlogix Simon XT User Manual - Manual (Page 13)

Simon XT User Manual 7
Control Description
LCD display Provides a 2 x 16 character array that displays a variety of
phrases and icons.
Scroll up/scroll down arrows Press to scroll through lists of similar items.
OK Press to select a particular menu item or commit to panel memory
a menu item that has just been programmed.
Doors+Windows Press to arm perimeter sensors.
Motions Press to arm interior sensors.
Disarm Press to turn off intrusion/burglary protection for your system.
Only intrusion/burglary sensors are disarmed. Environmental
sensors, such as smoke and carbon monoxide detectors, stay
active at all times.
Status Press to determine system status.
Silent Press to silence exit beeps when arming.
Bypass Press to bypass a sensor.
Emergency (cross) Press and hold for 2 seconds (or press twice quickly) to call the
central monitoring station and notify them of a nonmedical call for
help.
Police (shield)
Fire (flame)
Microphone Use to communicate with the central monitoring station after an
alarm.
Numeric keypad Press the keys (0 through 9, *, #) to enter access codes or other
numerical data.
Door Covers the lower panel.
* (light bulb) Press to turn lights on. (Contact UTC Fire & Security for required
equipment information.)
# (dark light bulb) Press to turn lights off. (Contact UTC Fire & Security for required
equipment information.)
Speaker Provides voice output and sounds key beeps.
Standard text display
While the panel is idle, the text displays:
Display line 1 Arming level
Display line 2 HH:MMx (Time) and status icons
Arming level text could be one of the following:
• Subdisarmed
• Disarmed
• Doors+Windows
• Motions