Interlogix Simon XT User Manual - Manual (Page 11)

Simon XT User Manual 5
Table 2: System communication devices
Device Description
Control panel You can enter commands for your security system through simple key
presses on the panel. Depending on how your system is programmed,
you may need to enter an access code for certain commands. An
access code is a numeric code that allows authorization to operate
your security system.
Remote handheld
touchpad This touchpad gives you the option to enter commands from any room
in your house. You can enter commands through simple key presses
on the touchpad.
Key fob Key fobs are handy for simple arming and disarming control functions.
They are portable and can be carried offsite in a purse or pocket.
Telephone Touchtone telephones can be used to communicate with your system
while you are offsite. Ask your installer if you have this feature.
Note: The default master code is 1-2-3-4 when the security system is shipped
from the factory. You should change your code after your system is installed.