Interlogix NS3500-28T-4S Quick Start - Manual (Page 8)

- 8 -
5. Configuring IP Address via the Console
The Managed Switch is shipped with default IP address as follows:
IP Address: 192.168.0.100
Subnet Mask: 255.255.255.0
To check the current IP address or modify a new IP address for the Switch, please use the
procedures as follows:

Display of the current IP address
1. On” NS3500-28T-4S #” prompt, enter “show ip”.
2. The screen displays the current IP address, Subnet Mask and Gateway shown in Figure 5-1.
Figure 5-1:
IP Information Screen
Configuration of the IP address
3. On” NS3500-28T-4S#” prompt, enter “configure”.
4. On“ NS3500-28T-4S(config) #” prompt, enter the following command and press as
shown in Figure 5-2.
NS3500-28T-4S(config) # ip address 192.168.1.100 mask 255.255.255.0
NS3500-28T-4S(config) # ip default-gateway 192.168.1.254
The previous command would apply the following settings for the Switch.
IP Address: 192.168.1.100
Subnet Mask: 255.255.255.0
Gateway: 192.168.1.254
Figure 5-2:
Setting IP Address Screen