Interlogix NS4750-24S-4T-4X Quick Start - Manual (Page 7)

- 7 -
4. Terminal Setup
To configure the system, connect a serial cable to a COM port on a PC or notebook computer and to serial (console)
port of the Managed Switch. The console port of the Managed Switch is DCE already so that you can connect the
console port directly through the PC without the need of Null Modem.
A terminal program is required to make the software connection to the Managed Switch. Windows' Hyper Terminal
program may be a good choice, or you can download the other utility from Internet, such as Putty, TeraTerm.
1. Enables terminal emulator.
2. When the following screen appears, make sure that the COM port should be configured as:
 Baud
: 115200
 Data bits
: 8
 Parity
: None
 Stop bits
: 1
 Flow Control : None