Interlogix NS3502-8P-2S Installation Guide - Manual (Page 9)

IFS NS3502-8P-2S Quick Installation Guide 5
4. Logon to the Console
Once the terminal has connected to the device, power on the Managed Switch, the
terminal will display that it is running testing procedures.
Then, the following message asks the login user name and password. The factory
default user name and password as following and the login screen in Figure 4-1
appears.
User name: admin
Password: admin
Figure 4-1: Managed Switch Console Login Screen
1. For security reason, please change and memorize the
new password after this first setup.
2. Only accept command in lowercase letter under console
interface.