IC Realtime 3.0 MegaPixel 3.3-12mm VF IR Vandal IP Dome with SD & POE (ICIP3000DVIR) - Manual (Page 18)

Port Name Cable
Name Note
Color
Grey ALARM_IN2
Alarm input port 2. It is to receive the on-off signal
from the external alarm source.
Alarm output port. It is to output the alarm signal
White ALARM_NO
to the alarm device.
NO: normal open alarm output port.
It works with the ALARM_COM port.
It is to restore factory default setup.
Blue RESET
When the device is working properly, please
connect the blue cable (restore default setup port)
to the orange cable (GND signal) for 5 seconds,
the device can resume factory default setup.
Orange GND Ground port
2.2 Framework and Dimension
Please refer to the following two figures for dimension information. The unit is mm. See Figure 2-2 and
Figure 2-3.
Figure 2-2
12