IC Realtime 1080P (Full HD over coax) HD-SDI / HDcctv 20x Optical PTZ - Manual (Page 8)

2
Privacy masking is a user-defined, four-sided area that can not be viewed by you. The masking area will
move with pan and tilt functions and automatically adjust in size as the lens zooms.
1.2.10 Action on Alarm
This series quick-installed high definition speed dome has 7 alarm inputs (normal open or normal close) and
2 alarm outputs (normal open). Alarms can be individually programmed to initiated pattern, or go to an
associated preset, scanning, touring when received. Dome will return to a previously programmed state
after alarm acknowledgement or to its previous position before alarm.
1.2.11 Auto Flip
As long as you continue to hold the keyboard joystick in the down position, the dome rotates 180 degrees
and repositions itself for uninterrupted viewing of any subjects that passes directly beneath the dome.
1.2.12 Self-diagnosis
There is a self diagnosis procedure when dome boots up.
z Tilt and vertical engine check
z Camera diagnostics (mainly refers to the zoom function self-diagnosis)
z Display dome information such as address, baud rate, parity and diagnosis information.
1.2.13 Day/Night Mode (B/W & Color Mode)
Auto/manual switches in low illumination.
z Auto: camera will automatically adjust CCD light level.
z Manual: use menu or function keys to select day/night mode.
This function needs the speed dome driver (camera) supported.
1.2.14 Auto Focus
Auto focus allows the lens to remain in focus during zoom-in, zoom-out and motion functions to get vivid
image. You can use FAR or NEAR button to adjust focus manually.
1.2.15 Backlight Compensation
Balance the brightest and darkest sections of a scene to produce a more vivid picture.
1.2.16 Pan Tilt and Zoom
Supports zoom in and zoom out during tilt and pan movement.
In this period focus and iris are both in auto mode to get vivid image.
1.2.17 3D Intelligent Location
Working with DVR, just click part of the current scene will be displayed in the central window and
automatically zooms. All of these allow you to trace precisely.
1.2.18 Idle Status
When there is no available order, you can use menu to set dome idle status after specified duration. The idle
status includes preset, scan, tour, pattern and etc function.
1.2.19 Power up
The speed dome executes the power up operation after it rebooted and completed the initialization. The
power up function includes auto, preset, scan, tour, pattern and none.
1.2.20 Image Stabilizer/Flip
You can enable image stabilizer function and flip in the menu.
When there is vibration, this IS function can guarantee video stability and when flip, you can view video
more clearly.
This function needs speed dome driver (camera) supported.
1.3 Specifications
1.3.1 Performance Specifications