Air flow buttons – HONDA 2005 Civic Sedan - Owner's Manual User Manual
Page 90
Turning this dial clockwise increases
the temperature of the airflow.
This button turns the air
conditioning on and off. The
indicator in the button is on when
the A/C is on.
The outside air intakes for the
heating and cooling system are at
the base of the windshield. Keep this
area clear of leaves and other debris.
The system should be left in Fresh
Air mode under almost all conditions.
Keeping the system in Recirculation
mode, particularly with the A/C off,
can cause the windows to fog up.
Switch to Recirculation mode when
driving through dusty or smoky
conditions, then return to Fresh Air
mode.
This button turns the rear window
defogger off and on (see page
).
Use the mode control dial to select
the vents the air flow from. Some air
will flow from the dashboard vents in
all modes.
Air flows from the center
and corner vents in the dashboard.
Air flows from the floor
vents. When you select
, the
system automatically switches to
Fresh Air mode.
Air flows from the defroster
vents at the base of the windshield.
When you select
or
,
the system automatically switches to
Fresh Air mode and turns on the
A/C.
Turn this dial to increase or decrease
the fan speed and airflow.
Airflow is divided between
the vents in the dashboard and the
floor vents.
Airflow is divided between
the floor vents and the defroster
vents at the base of the windshield.
When the recirculation indicator is
on, air from the vehicle’s interior is
sent throughout the system again.
When the indicator is off, air is
brought in from the outside of the
vehicle (Fresh Air mode).
Optional on DX models
Air Flow Buttons
Fan Control Dial
Temperature Control Dial
Air Conditioning (A/C) Button
Rear Window Def ogger Button
Mode Control Dial
Recirculation Button
Fe
a
tu
re
s
89
Main Menu
Table of Contents