HONDA 2005 Civic Sedan - Owner's Manual - Manual (Page 40)

To install a LATCH-compatible child
seat:
Move the seat belt buckle or
tongue away from the lower
anchors.
Make sure there are no objects
near the anchors that could
prevent a secure connection
between the child seat and the
anchors.
Your vehicle is equipped with
LATCH (Lower Anchors and
Tethers for Children) at the outer
rear seats. The lower anchors are
located between the seat-back and
seat bottom, and are to be used only
with a child seat designed for use
with LATCH.
Small marks are positioned to
indicate the locations of each anchor
point.
Place the child seat on the vehicle
seat, then attach the seat to the
lower anchors according to the
child seat maker’s instructions.
Some LATCH-compatible seats
have a rigid-type connector as
shown above.
1.
2.
3.
Installing a Child Seat Using
LATCH
Installing a Child Seat
Dr
iv
er
and
P
asseng
er
Saf
e
ty
39
MARKS
LOWER ANCHORS Rigid type
Main Menu Table of Contents